How to change the hydraulic oil in an excavator?

Nov 17, 2026

Leave a message

David Wilson
David Wilson
David is a quality control expert at Synbon. He strictly adheres to international quality standards, conducting comprehensive inspections on all products, from small - sized excavators to large - capacity telehandlers. His work guarantees the reliability and durability of Synbon's machinery.

Changing the hydraulic oil in an excavator is a crucial maintenance task that can significantly impact the machine's performance and longevity. As an excavator supplier, I've seen firsthand how proper hydraulic oil maintenance can save operators time and money in the long run. In this blog post, I'll walk you through the steps of changing the hydraulic oil in an excavator, share some tips and tricks, and explain why it's so important.

Why Changing Hydraulic Oil Matters

Before we dive into the process, let's talk about why changing the hydraulic oil is so important. Hydraulic oil serves several critical functions in an excavator. It lubricates the moving parts of the hydraulic system, reduces friction and wear, and helps to transfer power from the engine to the various hydraulic components. Over time, however, the oil can become contaminated with dirt, debris, and moisture, which can lead to decreased performance, increased wear and tear, and even system failure.

Regularly changing the hydraulic oil helps to keep the system clean and functioning properly. It also extends the life of the hydraulic components, reduces the risk of breakdowns, and improves the overall efficiency of the excavator. By following a proper maintenance schedule and using high-quality hydraulic oil, you can ensure that your excavator operates at its best for years to come.

Step-by-Step Guide to Changing Hydraulic Oil

Now that we understand why changing the hydraulic oil is important, let's go through the steps of the process. Keep in mind that the exact steps may vary depending on the make and model of your excavator, so be sure to consult your owner's manual for specific instructions.

Step 1: Gather the Necessary Tools and Supplies

Before you start, you'll need to gather the following tools and supplies:

  • Hydraulic oil (make sure to use the type recommended by the manufacturer)
  • Oil drain pan
  • Wrench or socket set
  • Filter wrench
  • New hydraulic filter
  • Funnel
  • Rags or paper towels

Step 2: Prepare the Excavator

Park the excavator on a level surface and turn off the engine. Engage the parking brake and lower the bucket to the ground. Allow the engine to cool down for at least 30 minutes to prevent burns from hot oil.

Step 3: Locate the Hydraulic Oil Drain Plug

The hydraulic oil drain plug is usually located on the bottom of the hydraulic oil tank. Refer to your owner's manual to find the exact location. Place the oil drain pan under the drain plug to catch the old oil.

Step 4: Drain the Old Oil

Using a wrench or socket set, loosen the drain plug and allow the old oil to drain into the pan. Be careful not to spill any oil on the ground. Once the oil has stopped draining, tighten the drain plug securely.

Step 5: Replace the Hydraulic Filter

The hydraulic filter helps to remove contaminants from the oil. Over time, the filter can become clogged and need to be replaced. Locate the hydraulic filter, which is usually located near the hydraulic oil tank. Use a filter wrench to remove the old filter. Before installing the new filter, apply a thin layer of hydraulic oil to the rubber gasket to ensure a proper seal. Screw the new filter onto the filter housing by hand, then tighten it an additional 3/4 to 1 turn using the filter wrench.

large mining excavator (6)Mini Excavator 2.5 Ton (7)

Step 6: Refill the Hydraulic Oil

Using a funnel, pour the new hydraulic oil into the hydraulic oil tank. Refer to your owner's manual for the recommended oil capacity. Be careful not to overfill the tank. Once you've added the appropriate amount of oil, check the oil level using the dipstick or sight glass. The oil level should be within the recommended range.

Step 7: Check for Leaks

After refilling the hydraulic oil, start the engine and let it run for a few minutes. Check for any leaks around the drain plug, filter, and hydraulic lines. If you notice any leaks, tighten the connections or replace the faulty components.

Step 8: Dispose of the Old Oil Properly

The old hydraulic oil is considered hazardous waste and should be disposed of properly. Check with your local recycling center or waste management facility for instructions on how to dispose of the oil safely.

Tips and Tricks

Here are some additional tips and tricks to make the hydraulic oil change process easier and more efficient:

  • Use the Right Oil: Always use the type of hydraulic oil recommended by the manufacturer. Using the wrong oil can cause damage to the hydraulic system.
  • Change the Filter Regularly: In addition to changing the hydraulic oil, it's important to change the hydraulic filter at regular intervals. A clogged filter can reduce the flow of oil and cause damage to the hydraulic components.
  • Keep the System Clean: To prevent contamination of the hydraulic oil, keep the hydraulic system clean. Avoid working in dirty or dusty environments, and make sure to clean the hydraulic oil tank and components regularly.
  • Follow a Maintenance Schedule: Establish a regular maintenance schedule for your excavator and stick to it. This will help to ensure that the hydraulic system is properly maintained and functioning at its best.

Our Excavator Offerings

As an excavator supplier, we offer a wide range of excavators to meet the needs of different customers. Whether you're looking for a Mining Wheel Excavator for heavy-duty mining operations, a Mini Excavator 2.5 Ton for small-scale construction projects, or a Large Mining Excavator for large-scale mining and earthmoving, we have the right excavator for you.

Our excavators are built to last and are designed to provide reliable performance in even the toughest conditions. We also offer a comprehensive range of parts and services to keep your excavator running smoothly. If you're interested in learning more about our excavators or have any questions about hydraulic oil maintenance, please don't hesitate to contact us. We're here to help you find the right excavator for your needs and ensure that it performs at its best.

Conclusion

Changing the hydraulic oil in an excavator is an important maintenance task that can help to keep the machine running smoothly and extend its lifespan. By following the steps outlined in this blog post and using high-quality hydraulic oil and filters, you can ensure that your excavator operates at its best for years to come. If you have any questions or need further assistance, don't hesitate to contact us. We're here to help you get the most out of your excavator.

References

  • Manufacturer's owner's manual for your excavator
  • Industry standards and best practices for hydraulic oil maintenance
Send Inquiry