Packaging and shipping: 5 units / 1*40GP; 1 unit / 20GP Container
Other best-selling products
Hot Tags: 2.7 ton mini crawler excavator, China 2.7 ton mini crawler excavator manufacturers, suppliers, factory
Technical Specification
|
Engine |
|
|
Model |
Kubota D1703 18.5KW/2200rpm |
|
Max. Turque |
97.4N.m/1500RPM |
|
Type |
In-line, water cooled, Mechanical pump, normally aspirated |
|
Displacement |
1.647L |
|
No. of cylinder |
4 |
|
Main Performance |
|
|
Swing Speed |
0-11 r/min |
|
Traveling Speed(high/low) |
4.4/2.4km/h |
|
Grade ability |
58% |
|
Max. Bucket Digging Force |
30.4kN |
|
Arm Digging Force |
18.2kN |
|
Ground Pressure |
32 Kpa |
|
Hydraulic system pressure |
22.5Mpa |
|
Machine Weight |
3810 KG |
|
Boom Length |
2535Mm |
|
Arm Length |
1400Mm |
|
Fuel Tank capacity |
42 L |
|
Hydraulic Tank capacity |
48.5L |
|
Engine oil capacity |
7L |
|
Carrier roller(each side) |
1 |
|
Supporting roller(each side) |
4 |
|
Overall Dimensions |
|
|
Overall Length |
4915 mm |
|
Overall Width |
1720 mm |
|
Overall Height |
2525 mm |
|
Mini Ground clearance |
295 mm |
|
Track width |
300 mm |
|
Axle base(Track length on ground) |
1670 mm |
|
Length of track |
2154 mm |
|
Track Gauge |
1420 mm |
|
Swing radius at tail |
860mm |
|
Swing radius at front |
2538 mm |
|
Height of blade |
350 mm |
|
Operation parameters |
|
|
Bucket Capacity |
0.12 m3 |
|
Max. Digging Radius |
5480 mm |
|
Max. Digging Depth |
3208 mm |
|
Max. Digging Height |
4800 mm |
|
Max. Dumping Height |
3406 mm |
|
Max. vertical digging depth |
3208 mm |
FAQ
1.Insufficient Digging Force & Slow Operation: Causes & Self-Check
Common Causes:
Hydraulic oil deterioration due to long-term use without replacement.
Incorrect pressure adjustment of the main relief valve.
Internal leakage in the hydraulic pump.
Self-Check Steps:
Start by checking the hydraulic oil level and the condition of the filter element to rule out the simplest issues.
2.Engine "Stalling" (Black Smoke & RPM Drop): Diagnosis
This is one of the most common faults, usually caused by a power mismatch between the engine and hydraulic system.
Root Causes:
Excessive Hydraulic Demand: Stuck relief valve, faulty pump regulator.
Insufficient Engine Power: Clogged fuel system, turbocharger failure.
Quick Diagnosis:
If the machine runs fine unloaded but stalls under load (when digging), the issue is likely a power mismatch in the engine or hydraulic system.
